Discription

This product can be customized based on the requirments

Low pressure and high and low temperature can be used separately.

The controller is easy to operate, and the deviation parameters can be adjusted and corrected.

High sealing measures are adopted to ensure the vacuum of the  door.

The low temperature test and height test can be reasonably combined with simulation, and a test chamber can be really realized into a multi-purpose test chamber.

Discription

The optimized temperature, humidity and temperature control system brings better performance 

The test chamber can be adjusted according to the height of the vibrating table

It can be connected to other vibraters when installed again

The front of the test chamber has a complete usable space, and there is no influence on the feet or supports of the vibrating table area 

Through the digital input and output ports, the program of vibration test and temperature and humidity test can be integrated 

Operation, monitoring, and documentation of the test chamber are archived via S!  MPAC* Controller

The color touch screen is clearly laid out using a menu-oriented interface without the operator having a programming base 

Data exchange via Ethernet or USB interface

Test space lighting optimizations and turn off automatically over time

The central power supply is located at the rear of the test system

Components that need maintenance are located in easy repair locations to ensure minimum maintenance time  

The expansion of inlet and outlet air volume optimizes the air circulation system and ensures an even distribution of temperature  

Extreme installation conditions can ensure barrier-free operation when the ambient temperature is below 35 ° C 

Discription

It can simulate a variety of salt spray environments and test the corrosion resistance of materials.

Using advanced spray system, the salt spray is evenly distributed.

The temperature and humidity control system is precise to ensure stable test conditions.

Complete safety protection measures to ensure safe operation.

Support a variety of test standards to meet different needs.

Discription

The chamber is made of imported PVC board, and the inner chamber is made by advanced ring belt stereo reinforcing technology, which makes the structure strong and solid .

The test chamber is heated on five sides to ensure the evenness of the test chamber.

The saturated air is heated and humidified by using Henry's law, and the required humidity in the test chamber is provided.

PID temperature controller, control error within ±0.1.

Use the full detection system. When the fault occurs, it will light up the display.

Nozzle: adopts Benoit's theorem to absorb brine and atomize, the diffusion rate of fog is doubled, and naturally falls on the test sample, the amount of fog falling can be controlled at±0.3ml/80cm2/h.

Discription

Thermal shock time control

Computer intelligent control of impact conversion, reach the set time, the program automatically switch to another test process, the impact frequency is 0 ~ 100 times /h.

Low temperature shock time: The value ranges from 10 to 10000s

High temperature shock time: the value ranges from 10 to 10000s

Safety protection device

The equipment has such emergency shutdown functions as overtemperature protection, overpressure alarm, liquid low level alarm, door opening alarm, oil leakage alarm and so on.

Discription

Two chambers vertically arranged type

The ball shaft drive reliably guides the basket

The guardrail around the basket can be removed to protect the sample

In the test area, the air circulation speed is fast, the temperature change time is short and the temperature distribution is uniform

An integrated air compensation system for long-term testing is installed in the chamber

Large lead hole for sample power supply and measurement

High resolution color touch screen

Minimal energy consumption